Compressors, technical specifications

 

The diaphragm-type compressor.

The diaphragm-type compressor units are intended for compression of various dry gases, except oxygen, free of oil and mechanical particles being the result of surfaces friction.

Diaphragm type compressor units

 

The diaphragm-type compressor units are widely used in laboratory research, oil and gas industries, chemical industry, metallurgy, medical and pharmaceuticals industries as well as in electrical industry.

The are two types of these units: with piston force up to 16 kN (of 1.6MK type) and with piston force from 16 to 40 kN (of 4.0MK type).

The compressor units incorporate the compressor proper, electric motor, auxiliary systems mounted on common frame, which are equipped with automatic control and emergency protection system ensuring both manual and automatic control, visual control of main parameters, and switching off of electric motor in case of deviation from the preset mode. Compressors are provided with water cooling.

Advantages and distinctive features

• The compressor units have a uniform design. They are provided with exchangeable parts (only for the units of the same type).
• They are automated and do not require service personnel to be present all the time.
• The compressors are certified in accordance with ГОСТ 12.2.016-81, ГОСТ Р МЭК 60204-1-99 (Russian national standard), with the codes and rules of Gosgortechnadzor (Federal Authority of Technical Supervision) of the Russian Federation and are provided with the certificates of conformance No. РОСС RU АЯ 45.В02059.
• The warranty liability period is 24 months.

Product mix includes the following compressor units:

• M1 – for compression of non-aggressive gases in explosion- proof rooms;
• M2 – for compression of aggressive gases in explosion – proof rooms;
• M3 – for compression of non-aggressive gases in highly explosive rooms of class В-1a (as per the rules of electric equipment arrangement);
• M4 – for compression of aggressive gases in highly explosive rooms of class В-1a (as per the rules of electric equipment arrangement).

Technical specifications

Unit type	W	P1	P2	P	R	LxBxH	M
1.6MK-8/200	9.8	0.02(0.2)	20(200)	5.4	0.4	1600x800x1250	900
1.6MK-10/12.5	11	0.02(0.2)	1.25(12.5)	2	0.25	1225x700x1050	670
1.6MK-12/64	13.2	0.02(0.2)	6.4(64)	4.7	0.25	1580x800x1250	840
1.6MK-16/12.5-200	21	1.25(12.5)	20(200)	6.7	0.25	1700x900x1250	870
1.6MK-20/12.5	22	0.02(0.2)	1.25(12.5)	4.25	0.4	1500x800x1200	1040
4.0MK-20/220	20	0.02(0.2)	22(220)	11.4	0.64	2100x960x1360	1830
4.0MK-30/5-400	29	0.5(5)	40(400)	14	1.22	2150x950x1510	1780
4.0MK-60/12.5-200	70	1.25(12.5)	20(200)	15	1.22	2200x900x1600	1780
4.0MK-70/15-400	70	1.5(15)	40(400)	24	1.22	2150x950x1510	1980
4.0MK-80/50-400	80	5(50)	40(400)	23	1.56	2150x950x1610	1680

The delivery scope includes service documents and compressor spare parts for warranty liability period.

• W, m³/h – capacity.
• P₁, MPa (kgf/cm²) - initial pressure.
• P₂, MPa (kgf/cm²) - outlet pressure.
• P, kW - power consumption.
• R, m³/h - cooling water consumption.
• LxBxH, mm – overall dimensions, length x width x height.
• M, kg - weight.

 

Compressor units of AGW type (Natural Gas Compressors)

The compressor units AGW-5/1.1-250, AGW-8/4-250, AGW-9/7-250, AGW-10/13-250 are intended for natural gas compression up to pressure of 25 MPa (250 kgf/cm²).

The compressors are intended to be used in temperate and cold climate, version 4.2 in accordance with ГОСТ (Russian national standard) 15150-69. It means for operation within ambient temperature range from +5 °C to +40 °C.

The warranty period of operation is 12 months.

The delivery scope includes service documents and compressor spare parts for warranty liability period.

Advantages and distinctive features

• The compressor units are automated and do not require the service personnel to be present all the time.
• They are characterized by smaller weight and overall dimensions in comparison with other similar compressor units.
• Gas motor can be used for compressor drives instead of electric one.
• The compressor unit is designed to work within different pressure regimes,depending on the source of natural gas.

Technical specifications